How to Build Pickup Truck Side Rails

But we stick to this as a standard because it works for most trucks. The wood rails must be stained before installation, though. This is why knowing what the final design will be is critical.

The particular bolts I used were 3/8″ bolts that were 4″ long . Also, I made sure to use a washer between the bolt and the nut so as to get the best tightness when secured and not allow the nut to bite into the wood. In order to create the rails that I have pictured, I used pressure treated lumber 2x4s. It’s important to use pressure treated wood since this will be exposed to the elements and you do not want the wood rotting in the weather. You can also paint the wood, or seal it with a water sealant, but it’s not necessary with pressure treated wood. But if your aren’t a wood person, a cabinet shop could make them, or someone with some woodworking power tools and some carpentry skills.

This is my current occupation .Have been asssociated with woodworking all my life . Have some ideas on the bed sides .Some which I will use on the stock truck under const. If you go to Home Depot or Lowes and purchase just tell them to cut the boards the length you need they will cut them as long as you get longer boards. They will tell you don’t count on it being exact but it will be pretty darn close. Then get some screws, sand paper, stain, & varnish and you have bed sides. From crafts to cakes, walls to weddings – elevate your creative potential with stencils!

Make a mark at 2-inches from one end of the six posts. Make a mark at 4-inches from the bottom of the posts. Make a third mark midway between these two marks. Make a mark on those marks that is centered between the long sides of the posts. This truck also provides a vintage aesthetic unlike any other, which only becomes more evident with a wood rail exterior. After the posts are in place, one panel at a time can be added to those posts.

They should fit snugly and require a little bit of pushing to get them in, but they should not be too tight nor wobbly. Individual teachers degree abbr size, height,length,corner design.Rausfallschutz . Great seller with very good positive feedback and over 50 ratings.

Truck side rails are a common need among truck owners who use their pickup trucks for hauling on a regular basis. Most want a set of side rails that fit into the stake pocket holes located at the top of the truck cargo bed walls for ease of mounting or removing them. For trucks without stake pocket holes, building side rails is a matter of building something that resembles a post and rail fence.

This allows drivers to use wood side rails as an easy restoration method. Truck enthusiasts can restore many types of classic trucks with wood rails. It is important to know the type of trucks available and their pros and cons. Next, the wood panels and posts must be properly measured and cut to fit the truck bed.

Similar Posts